Product Catalog


4.1 CFM AT 100 PSI


Wheel Barrow  compressor 5.5HP 8 gallon tank 8.9 cfm at 100 psi

8.6 cfm at 125 psi

Designed application laying luan in prepration of laying linoleum.

  • Designed For these applications
  • Decorative trim
  • Finished wood panels
  • Drawers
  • cabinets

Fastener Range 1/2 - 1 1/2

Fastener Guage 18 GA

Fastener Type sx5035 Series Staples

The industries best solution to blind nailing close to the wall.   Save both, time and money!"

Pressure activated...simply press down, and let the tool do the work.

The Power Palm will allow blind nailing closer to the wall and reduce the amount of face nailing.

"Using the Power Palm with Powernail 16 or 18 gage L Cleats you will maintain the integrity of your installation, by using the same fastener from start to finish"

"Blind nail, top nail...tight spots and corners, the Power palm gets them all!"

Featuring 360 degree swivel tip


 is a pneumatic Powernailer® designed for 18 gage cleats.

The 50P is recommended for use on 3/8", 1/2", 5/8" and 3/4" Tongue and Groove flooring. The Model 50P with 18 gage Powercleats is your best choice for installing some of the harder, 3/4" exotics such as bamboo and other solid or engineered wood flooring.

The model 50P uses a thinner 18 gage cleat that is less likely to split the tongue on thinner woods.  It is also recommended for flooring that is a very hard species like hickory. Many of the hard exotics available today require a thinner cleat to penetrate without splitting the tongue.

The standard configuration is (L/S), Long Handle with Short Channel, which holds 100 Powercleats®.  Long handle configuration provides 18" height from floor to handle grip.

<span style="

Surface Nailer is recommended for use on 1/2", 5/8",3/4" and 33/32" Tongue and Groove flooring.

The pneumatic 445SN allows the user to nail flooring up to 1" from the wall.

Nailer package includes a choice of Black or White 3mi Mallet, Lube oil, 2 box wrenches, 2 Allen wrenches and an extra driving blade.

Requires a 70 to 110 psi air compressor.

The Model 45 is a manual, single-blow nailer which use 16 gage cleats to install Tongue & Groove flooring.

The Model 45 is recommended for use on board sizes of 5/8", 3/4" and 33/32" Tongue and Groove flooring.

Nailer package includes a choice of a Black or White 5mi Mallet, an extra driving blade, plunger spring, feeder spring, blade retainer and 8/25 adapter plate for installing 3/4" & 22mm Tongue and Groove Flooring.

Options: Adapter plate 826-12 for 1/2" Tongue and Groove flooring, or adapter plate 826-58 for 5/8" Tongue and Groove flooring.

The Model 445is a pneumatic Powernailer® which uses 16 gage cleats for the installation of Tongue & Groove hardwood flooring.

The Model 445 is recommended for use on 5/8", 3/4" and 33/32" flooring.

Chicago Pneumatic 90lb Breaker

Chicago Pneumatic 60lb Breaker

Towable Diesel 185CUFT Compressor