Our floor machines are field tested for heavy duty stripping, scrubbing and polishing hard surface flooring. The simple and rugged design makes them easily accessible with low cost and maintenance requirements. They are built for large areas, yet ideal for use in small and confined areas.

The industries best solution to blind nailing close to the wall.   Save both, time and money!"

Pressure activated...simply press down, and let the tool do the work.

The Power Palm will allow blind nailing closer to the wall and reduce the amount of face nailing.

"Using the Power Palm with Powernail 16 or 18 gage L Cleats you will maintain the integrity of your installation, by using the same fastener from start to finish"

"Blind nail, top nail...tight spots and corners, the Power palm gets them all!"

Featuring 360 degree swivel tip

Magnet

The Model 45 is a manual, single-blow nailer which use 16 gage cleats to install Tongue & Groove flooring.

The Model 45 is recommended for use on board sizes of 5/8", 3/4" and 33/32" Tongue and Groove flooring.

Nailer package includes a choice of a Black or White 5mi Mallet, an extra driving blade, plunger spring, feeder spring, blade retainer and 8/25 adapter plate for installing 3/4" & 22mm Tongue and Groove Flooring.

Options: Adapter plate 826-12 for 1/2" Tongue and Groove flooring, or adapter plate 826-58 for 5/8" Tongue and Groove flooring.

Floor Scrapers provide an easy method to clean up construction materials on concrete surfaces or wood sub floors.

Buffer 17 Inch Master Craft

Dry areas quickly with this compact, three-speed blower.
Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more.
Ensure durability and many years of use with this blower's rotationally-molded body

Using four-pad, random orbit technology, the U-Sand Pro sander makes floor sanding easy and worry-free

For the tightest floor possible choose the 2" x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 " to 1" Solid wood flooring on a subfloor that is built with joists. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470.

PNI’s 1-1/2 In. 18 gauge L Head Flooring nail is for use with PNI’s 418A Portamatic Evolution and with all brands of nailers using an 18 ga L Flooring nail /cleat. The 1-1/2 In. nail is recommended for use with 1/2 In. to 5/8 In. engineered, bamboo and solid hardwood floors. The 18 gauge nail is a thinner than the traditional 16 gauge nail and is effective in reducing the splitting of tongues on vertical and horizontal grain bamboo and exotic hardwoods. The thinner nail will also reduce the chance of dimpling engineered and thinner hardwood floors. Our nail has sharp serrated edges to bite into the flooring and a blunt tip to help reduce the risk of slitting the hardwoods. The nails are collated with tape and are packed 1200 per pack. Each pack will cover approximately 200 sq ft of 2-1/4 In. and 350 sq ft of 3-1/4 In. flooring when following a nailing schedule of 6 to 8 inches. Our nails are produced with the finest material and will hold up for the life of the floor

7" Floor edger runs at 3600 RPM is powerful enough for the toughest job and finishes beautifully

The SL8 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results!

Single Disc Floor Grinder 1.5HP-115v-60Hz (Price does not include grinding stones)

JR Power Stretcher Kit is for stretching and flatteneing of carpet

Heat Iron melts glue for carpet to adhere to

Knee Kicker is for stretching and flattening of carpet

Floor Tile Cutter cuts various sizes and shapes of ceramic tile

Linoleum Roller Transporter allows a linoleum roller to be transported easily from one location to another via hard plastic wheels.